View TLP114AIGM_410765.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

TLP114A(IGM)
TENTATIVE
TOSHIBA Photocoupler GaAAs Ired + Photo-IC
TLP114A(IGM)
Transistor Invertor Inverter For Air Conditioner Line Receiver Ipm Interfaces
The TOSHIBA mini flat coupler TLP114A is a small outline coupler, suitable for surface mount assembly. TLP114A consists of a high output power GaAAs light emitting diode, optically coupled to a high speed detector of one chip photo diode-transistor. TLP114A(IGM) has no internal base connection, and a faraday shield integrated on the photodetector chip provides an effective common mode noise transient immunity. TLP114A(IGM) guarantees minimum and maximum of propagation delay time, switching time dispersion, and high common mode transient immunity. There for TLP114A(IGM) is suitable for isolation interface between IPM(intelligent power module) and control IC circuits in motor control application. l Isolation voltage: 3750Vrms(min.) l Common mode transient immunity : 10kV/s(min.) @VCM=1500V l Switching time: tpHL, tpLH=0.1s(min.) =0.8s(max.) @IF=10mA, VCC=15V, RL=20k, Ta=25C l Switching time dispersion: 0.7s(max.) (|tpLH-tpHL|) l TTL compatible l UL recognized: UL1577, file no.E67349 Unit in mm
TOSHIBA Weight: 0.09g
11-4C2
Pin Configuration(top view)
1 6 5 3 SHIELD 4
1 : Anode 3 : Cathode 4 : Emitter (GND) 5 : Collector (Output) 6 : VCC
Schematic
IF 1 IO VF 3 6 VO 5 GND Shield 4 ICC VCC
1
2002-09-25
TLP114A(IGM)
Maximum Ratings(Ta = 25C)
Characteristic Forward current LED Pulse forward current Peak transient forward current Reverse voltage Output current Detector Peak output current Output voltage Supply voltage Output power dissipation Operating temperature range Storage temperature range Lead soldering temperature(10s) Isolation voltage(AC, 1min., R.H.60%, Ta=25C) (Note 5) (Note 4) (Note 1) (Note 2) (Note 3) Symbol IF IFP IFPT VR IO IOP VO VCC PO Topr Tstg Tsol BVS Rating 20 40 1 5 8 16 -0.5~20 -0.5~30 100 -55~100 -55~125 260 3750 Unit mA mA A V mA mA V V mW C C C Vrms
(Note 1): Derate 0.36mA above 70C. (Note 2): 50% duty cycle, 1ms pulse width. Derate 0.72mA / C above 70C. (Note 3): Pulse width PW 1s, 300pps. (Note 4): Derate 1.8mW / C above 70C. (Note 5): Device considerd a two terminal device: pins1, 3 shorted together and pins4, 5, 6 shorted together.
2
2002-09-25
TLP114A(IGM)
Electrical Characteristics(Ta = 25C)
Characteristic Forward voltage Forward voltage temperature coefficient Reverse current Capacitance between terminal Symbol VF VF / Ta IR CT IOH(1) High level output current Detector IOH(2) IOH High level supply current Supply voltage Output voltage IF=16mA IF=16mA VR=3V VF=0, f=1MHz IF=0mA, VCC=VO=5.5V IF=0mA, VCC=30V VO=20V IF=0mA, VCC=30V VO=20V, Ta=70C IF=0mA, VCC=30V ICC=0.01mA IO=0.5mA Test Condition Min. 1.22 Typ. 1.42 -2 30 3 Max. 1.72 10 500 5 A 50 Unit V mV / C A pF nA
LED
ICCH VCC VO
30 20
0.01
1
A V V
Coupled Electrical Characteristics(Ta = 25C)
Characteristic Symbol Test Condition IF=10mA, VCC=4.5V VO=0.4V IF=16mA, VCC=4.5V VO=0.4V, Ta=-25~100C IF=10mA, VCC=4.5V IO=2.4mA Min. 25 15 Typ. 35 Max. 75 % 0.4 V Unit
Current transfer ratio
IO / IF
Low level output voltage
VOL
Isolation Characteristics(Ta = 25C)
Characteristic Capacitance input to output Isolation resistance Symbol CS RS Test Condition V=0, f=1MHz R.H.60%, VS=500V (Note 5) AC, 1 minute Isolation voltage BVS AC, 1 second, in oil DC, 1 minute, in oil (Note 5) Min. 5x10
10
Typ. 0.8 10
14
Max.
Unit pF
3750
10000 10000
Vrms Vdc
3
2002-09-25
TLP114A(IGM)
Switching Characteristics(Ta = 25C, VCC = 15V)
Characteristic Propagation delay time (H L) Propagation delay time (L H) 1 Switching time dispersion between on and off Common mode transient immunity at logic high output (Note 6) Common mode transient immunity at logic low output (Note 6) CML tpLH Symbol tpHL Test CirCuit Test Condition IF=0 10mA, RL=20k IF=0 10mA, RL=20k Ta=0~85C IF=0 10mA, RL=20k Ta=-25~100C IF=10 0mA, RL=20k |tpLH-tpHL| IF=10 0mA, RL=20k Ta=0~85C IF=10 0mA, RL=20k Ta=-25~100C CMH 2 IF=0mA VCM=1500Vp-p RL=20k IF=10mA VCM=1500Vp-p RL=20k Min. 0.1 0.1 0.1 Typ. 0.45 0.45 0.45 0.15 0.25 0.25 Max. 0.8 0.9 1.0 0.7 0.8 0.9 s s Unit
10000
15000
V / s
-10000 -15000
V / s
(Note 6): CML is the maximum rate of fall of the common mode voltage that can be sustained with the output voltage in the logic low state (VO<1V). CMH is the maximum rate of rise of the common mode voltage that can be sustained with the output voltage in the logic high state (VO<4V). (Note 7): Maximum electrostatic discharge voltage for any pins: 100V (C=200pF, R=0).
Test Circuit 1: Switching Time Test Circuit
Pulse input 1 PW = 100s Duty ratio = 1/10 IF monitor 100 3 6 5 0.1F 4 RL VO Output monitor VCC = 15V IF 0 VO 1.5V tpHL tpLH 15V 1.5V VOL
4
2002-09-25
TLP114A(IGM)
Test Circuit 2: Common Mode Noise Immunity Test Circuit
1500V
IF 1 6 5 0.1F 3 VCM Pulse gen ZO = 50 4 RL
VCC = 5V VCM VO Output monitor VO (IF = 0mA) tr
90%
10% tf
0V
15V 4V 1V
VO (IF = 10mA)
VOL
CMH =
1200( V ) 1200( V ) , CML = t r (s ) t f (s )
5
2002-09-25
TLP114A(IGM)
RESTRICTIONS ON PRODUCT USE
*
000707EBC
TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc.. The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer's own risk. Gallium arsenide (GaAs) is a substance used in the products described in this document. GaAs dust and fumes are toxic. Do not break, cut or pulverize the product, or use chemicals to dissolve them. When disposing of the products, follow the appropriate regulations. Do not dispose of the products with other industrial waste or with domestic garbage. The products described in this document are subject to the foreign exchange and foreign trade laws. The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. The information contained herein is subject to change without notice.
*
*
* *
*
6
2002-09-25

▲Up To Search▲

Price & Availability of TLP114AIGM

	To Download TLP114AIGM Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .